Header EMI IC 2019

Planning

Tuesday, July 2, 2019

Time Event  
16:30 - 19:00 Registration - Registration to the Conference  
17:00 - 19:00 Ice Breaker  

Wednesday, July 3, 2019

Time Event  
08:00 - 08:30 Regirstration - Welcome session - Opening of the Conference.  
08:30 - 09:30 Feasible Data-Driven Probabilistic Modeling/Learning for Digital Twins (Amphithéâtre FREYSSINET) - Prof. Cherbal Farhat
 
09:30 - 10:30 Poro-Hyperelasticity: The Mechanics of Fluid-Saturated Soft Tissues - Prof. Patrick Selvadurai  
10:30 - 11:00 Coffee break  
11:00 - 12:20 MS6 : Computational and Analytical Methods in Geomechanics (Room # 321-04-01) - Sigfried Maiolino, Frederic Pellet, Antonin Fabbri, Jean-Michel Pereira, Henry Wong  
11:00 - 11:20 › Analytical methods for computing the contribution of rock bolts to reinforce joints. Validation and consequences for rock slope engineering - Siegfried Maiolino, Département Laboratoire de Lyon  
11:20 - 11:40 › Numerical Modeling of Liquefaction-induced Lateral Spreading: A Validation Study - Majid Manzari, Professor and Chair  
11:40 - 12:00 › Comparaison of unsupported tunnel convergence using Drucker Prager and Hoek-Brown criteria - Angeline Defay, École Nationale Supérieure de Techniques Avancées, Centre dÉtudes et dÉxpertise sur les Risques, lÉnvironnement, la Mobilité et lÁménagement  
12:00 - 12:20 › An advanced Hoek & Brown model with strain-softening: constitutive performance and numerical analyses - Nicolas Zalamea, Laboratoire sols, solides, structures - risques [Grenoble], Plaxis bv, A Bentley Systems company  
11:00 - 12:20 MS14 : Thin Textile (and Fiber) Reinforced Cement Composites and Ferrocement (Room # 321-04-02) - Amir Silarbi, Tine Tysmans, Corina Papanicolaou,  
11:00 - 11:20 › Experimental investigation of the influence of pre-cracking on the tensile behaviour of the Textile Reinforced Cementitious Composites, using Digital Image Correlation - Koleidou Dimitroula  
11:20 - 11:40 › A new phase change material textile reinforced concrete composite - Zakaria DJAMAI, DJAMAI Zakaria  
11:40 - 12:00 › Mechanical characterization of single- & double-layer TRM overlays applied on masonry - Catherine Papanicolaou, Department of Civil Engineering, University of Patras  
12:00 - 12:20 › Mechanical investigation on a new sustainable PCM-TRC sandwich panel - Zakaria DJAMAI, DJAMAI Zakaria  
11:00 - 12:30 MS19 : Stability and failure of structures and materials (Room # 321-04-03) - Noël Challamel, Wadee Ahmer  
11:00 - 11:18 › Stability Analysis of Beck's Column for different foundation - Emanuela Bologna, University of Palermo  
11:18 - 11:36 › B-Spline based Polynomial Chaos for Stochastic Galerkin Methods - Christoph Eckert, Institute for Risk and Reliability - Leibniz University Hannover  
11:36 - 11:54 › Experimental Investigation of Rupture Propagation in Cohesionless Backfill against a Rigid Retaining Wall Rotating about Its Base - Smita Patel, Indian Institute of Technology Kharagpur  
11:54 - 12:12 › Modélisation tridimensionnelle d'une poutre sandwich en utilisant la théorie exact de Saint-Venant. - Mourad KHEBIZI, Département de génie civil, Université des frères Mentouri, Constantine, Algérie. - Mohamed Guenfoud, Laboratoire de Génie civil et d'Hydraulique, Université 8 mai 1945, Guelma, Algérie  
12:12 - 12:30 › Modeling FSP Impact on Steel Plates Using Numerical Codes - Paul Sparks, USACE Engineer Research and Development Center  
11:00 - 12:30 MS25 : Current Challenges in Multiscale Mechanics - From Materials to Structures (Room # 321-04-05) - Christian Hellmich, Stefan Scheiner, Bernhard Pichler  
11:00 - 11:30 › MULTI-SCALE MODELING OF EVOLVING FIBER CONFIGURATIONS: APPLICATION TO ARTERIES - Claire Morin, Centre Ingénierie et Santé  
11:30 - 11:50 › Analytical and numerical mechanical modelling of composites containing expansive inclusions - Mohamed Amine BENAIMECHE, DEN-Service d'Etude du Comportement des Radionucléides (SECR), CEA, Université Paris-Saclay  
11:50 - 12:10 › Data-Driven Multiscale Modeling of Materials Synthesis - Karel Matous, Karel Matous  
12:10 - 12:30 › Hierarchical Elastoplasticity of Bone: Theory, Algorithm, and experimental Validation - Christian Hellmich, Institute for Mechanics of Materials and Structures, Vienna University of Technology  
11:00 - 12:30 MS20 : Towards the Next Generation of Smart Structures (Room # 321-04-08) - Mariantonieta Guitarrez Soto & Martha Grady  
11:00 - 11:18 › Life-cycle structural monitoring via temporal point cloud analytics - David Lattanzi, George Mason University [Fairfax]  
11:36 - 11:54 › Game theory vibration control methodology for resilient civil structures - Mariantonieta Gutierrez Soto, University of Kentucky  
11:54 - 12:12 › Laser spallation technique yields valuable adhesion information at cell-implant interfaces - Martha Grady, University of Kentucky  
12:12 - 12:30 › Autoadaptive System for Liquefaction Prevention - Antonio Bobet, Purdue University [West Lafayette]  
11:00 - 12:30 MS35 : Other EMI' interest papers (Room # 321-04-06) - Ali Daouadji, Zhenyu Yin  
11:00 - 11:18 › Three-Dimensional Finite Element Analysis of O-ring Metal Seals Considering Manufacturing Tolerances - Linan Qiao, Bundesanstalt für Materialforschung und –prüfung  
11:18 - 11:36 › Development of experimental measurement strategy to analyze the measurement method of location errors of rotary C-axis on five-axis machine tools - Yu-Ta Chen, Advanced Institute of Manufacturing with High-Tech Innovations, National Chung Cheng University, Taiwan, Department of Mechanical Engineering, National Chung Cheng University, Taiwan  
11:36 - 11:54 › The study of biochar's "carbon dioxide exchanger" effect and its impact on carbon sequestration - Harn Wei Kua, Harn-Wei Kua  
12:12 - 12:30 › Zonage Cartographique Des Aléas Mouvements De Terrains En Milieux Urbains, Cas De M'sila (Algérie) - BOUBAKEUR YKHLEF, Laboratory Materials and Durability of Constructions  
12:30 - 14:00 Lunch  
14:00 - 15:20 MS14 : Thin Textile (and Fiber) Reinforced Cement Composites and Ferrocement (Room # 321-04-02) - Amir Silarbi, Tine Tysman, Corina Papanicolaou  
14:00 - 14:20 › Textile Reinforced Cement Composites - Durability Aspects - Alva Peled, Alva Peled  
14:20 - 14:40 › Numerical simulation of FRCM bond performance - Santi Urso, University of Messina  
14:40 - 15:00 › TRM to masonry bond strength: The effect of the textile fibre material - Kuanysh Makashev, Centre for Structural Engineering and Informatics, Faculty of Engineering, The University of Nottingham  
15:00 - 15:20 › Experimental investigation of transversal connections in 3D Textile Reinforced Cement composites - Michael El Kadi, Vrije Universiteit [Brussel]  
14:00 - 15:30 MS19 : Stability and failure of structures and materials (Room # 321-04-03) - Noël Challamel, Wadee Ahmer  
14:00 - 14:18 › The Characterization of Fiber-Reinforced Polymer (FRP) Blast Retrofit Failure Modes - Genevieve Pezzola, U.S. Army Engineer Research and Development Center  
14:18 - 14:36 › A nonlocal continuum elastoplastic model built from bilinear hardening-softening lattices - Noël CHALLAMEL, Laboratoire d'Ingénierie des Matériaux de Bretagne  
14:36 - 14:54 › Stochastic analysis of lattice beam vibrations: discrete and nonlocal approaches - Noël Challamel, Univ. Bretagne Sud  
14:54 - 15:12 › Numerical analysis for the crack growth in a glass plate under thermal loading - Sayako Hirobe, Keio University  
15:12 - 15:30 › Experimental investigations on bond performance of GFRP bars to concrete under aggressive environments - Chunhua Lu, Jiangsu University  
14:00 - 15:30 MS25 : Current Challenges in Multiscale Mechanics - From Materials to Structures (Room # 321-04-05) - Christian Hellmich, Stefan Scheiner, Bernhard Pichler  
14:00 - 14:20 › Utilization of continuum micromechanical up- and down-scaling relations for studying transport processes in porous media - Stefan Scheiner, Vienna University of Technology  
14:20 - 14:40 › Thermal expansion of cement paste is governed by reversible water uptake/release by hydrates — A multiscale poromechanical analysis - Bernhard Pichler, Institute for Mechanics of Materials and Structures, TU Wien - Vienna University of Technology, Austria  
14:40 - 15:00 › Role of hydrogel consolidant on hygromechanical behavior of archaeological wood: a molecular dynamics study - Ali Shomali, Chair of Building Physics, Department of Mechanical and Process Engineering,  
14:00 - 15:30 MS26 : Linear and Nonlinear Vibrations of Complex Structures (Room # 321-04-08) - Daya + Robin  
14:00 - 14:18 › Quadratic approximations of the Wiener path integral technique for stochastic response determination of diverse engineering dynamical systems - Apostolos Psaros, Dept. of Civil Enginnering & Engineering Mechanics, Columbia University  
14:18 - 14:36 › Wiener path integral variational formulation with free boundaries for efficient stochastic analysis of high-dimensional dynamical systems - Ioannis Kougioumtzoglou, Dept. of Civil Enginnering & Engineering Mechanics, Columbia University  
14:36 - 14:54 › Nonstationary stochastic response determination of nonlinear oscillators with fractional derivative elements - Vasileios Fragkoulis, Institute for Risk and Reliability, Leibniz Universität Hannover  
14:54 - 15:12 › Relaxed Stationary Power Spectrum Model using Subjective Probabilities - Marco Behrendt, Leibniz University Hannover, Institute for Risk and Reliability  
15:12 - 15:30 › Symplectic Eigenvalue Analysis Method for Bending, Vibration, and Stability of Beams - Xiaojiao Li, Shenzhen University [Shenzhen]  
14:00 - 15:30 MS8: Poromechanical Couplings in Geomaterials and Geostructures (Room # 321-04-01) - Sigfried Maiolino, Frederic Pellet, Antonin Fabbri, Jean-Michele Pereira, Henry Wong  
14:00 - 14:20 › The effect of depositional layering tendency of inclusions on shale elastic anisotropy - Yao ZHANG, State Key Laboratory of Hydraulic and Mountain River Engineering, Department of Civil Engineering  
14:20 - 14:40 › Micromechanical origins of soil thermal collapse - Jibril Coulibaly, Northwestern University, Mechanics and Energy Laboratory  
14:40 - 15:00 › Towards a physical splitting of the void space into pores and constrictions - FEDA SEBLANY, Université de Lyon, Laboratoire de Tribologie et Dynamique des Systèmes  
14:00 - 14:30 MS7 : Resilient Behavior Modelling of Granular Based Materials (Room # 321-04-06) - Christophe Dano, Cyrille Chazallon, Pierre-Yves Hicher  
14:00 - 14:30 › Interdependent evolution of robustness, force transmission and damage in a heterogeneous quasi-brittle granular material: from suppressed to cascading failure - Antoinette Tordesillas, University of Melbourne  
14:30 - 15:30 MS5 : Recent Advances in the Behavior of Granular Materials (Room # 321-04-06) - Christophe Dano, Cyrille Chazallon, Pierre-Yves Hicher  
14:30 - 14:48 › Influence of elastic anisotropy on the mechanical behavior of soil - Lianxin HU, INSA de Lyon  
14:48 - 15:06 › Spherical-harmonics-based generation of shape-controlled realistic grains for DEM study on particle-scale behavior of clean and degraded ballasts - Xiang WANG, Central South University - Meng WANG, Central South University  
15:06 - 15:24 › Wave Dispersion Analysis of Discrete Granular Chains: Discrete versus Non-Local Approach - SINA MASSOUMI, Laboratoire de Mathématiques et Modélisation dÉvry  
15:30 - 16:00 Coffee break  
16:00 - 17:10 MS5 : Recent Advances in the Behavior of Granular Materials (Room # 321-04-06) - Christophe Dano, Cyrille Chazallon, Pierre-Yves Hicher  
16:00 - 16:30 › Keynote Lecture - Numerical modeling of salt and gypsum rocks dissolution : from micro-scale to industrial scale - Farid Laouafa, Institut National de lÉnvironnement Industriel et des Risques  
16:30 - 16:50 › Hydro-mechanical modeling of granular soils considering internal erosion - Zhenyu YIN, The Hong Kong Polytechnic University  
16:50 - 17:10 › Controlled desiccation behaviour of a clayey material: shrinkage's characterization and cracking mechanisms identification by image correlation - Lamine IGHIL-AMEUR, Cerema  
16:00 - 17:30 MS34 : Multiscale & Multiphysics coupling of construction materials (Room # 321-04-05) - Ariane Abou Chakra, Lauerie Lacarrière  
16:00 - 16:18 › Multiscale and multiphysics approaches for durability of construction materials and structures - Ariane ABOU CHAKRA, Laboratoire Matériaux et Durabilité des constructions [Toulouse] - Laurie Lacarrière, Laboratoire Matériaux et Durabilité des constructions [Toulouse]  
16:18 - 16:36 › Investigation on some simplification hypotheses in thermo-hydro-mechanical modeling of cement-based materials for drying applications - Hani Cheikh Sleiman, Laboratoire sols, solides, structures - risques [Grenoble]  
16:36 - 16:54 › A Reduced Order Model for computing homogenized properties in Porous Media - Antoine Moreau, Laboratoire de Sciences de l'Ingénieur pour l'Environnement  
16:54 - 17:12 › Composites reinforced flax or carbon fibers under hygrothermal ageing: Follow of durability by Acoustic Emission monitoring and tensile tests - Chuyen NGUYEN, Laboratoire des Matériaux Composites pour la Construction  
17:12 - 17:30 › Numerical Simulation of the Bond Behaviour between Bamboo Strips and Normal Strength Concrete - Bapi Mondal, Research Scholar  
16:00 - 17:00 MS14 : Thin Textile (and Fiber) Reinforced Cement Composites and Ferrocement (Room # 321-04-02) - Amir Silarbi, Tine Tysmans, Corina Papanicolaou  
16:00 - 16:20 › The effect of accelerated aging on polymer impregnated AR and E-glass textile reinforced concrete - Sachin Paul, Indian Institute of Technology Madras  
16:20 - 16:40 › Coating effect on the mechanical behaviour of Textile Reinforced Mortars in ambient and increased temperatures - Panagiotis Kapsalis, dept. MEchanics of Materials and Constructions, Vrije Universiteit Brussel, dept. of Civil Engineering, University of Patras, Structural Materials Laboratory  
16:40 - 17:00 › Evaluation of the results' accuracy of embedded optical fibres sensors in Textile Reinforced Cementitious Matrix Composites - Mohamed SAIDI, Laboratoire des Matériaux Composites pour la Construction  
16:00 - 17:30 MS26 : Linear and Nonlinear Vibrations of Complex Structures (Room # 321-04-08) - Robin + Boudaoud  
16:00 - 16:18 › FREQUENCY ANALYSIS OF FREE AND FORCED VIBRATIONS OF COMPOSITE SANDWICH BEAMS WITH VISCOELASTIC CORE - Youcef Khadri, Laboratoire de Mécanique Industrielle  
16:18 - 16:36 › NUMERICAL AND EXPERIMENTAL ANALYSES OF THE FREE AND FORCED VIBRATIONS OF 3D THIN-WALLED BEAMS - Wassim Jrad, Laboratoire dÉtude des Microstructures et de Mécanique des Matériaux  
16:36 - 16:54 › Application of the Wave Finite Element method to multi-span bridges - Gabriele Paratore, Politecnico di Torino [Torino], Laboratoire Navier  
16:54 - 17:12 › Modelling of axisymmetric structures with the wave finite element method - Tien Hoang, Laboratoire Navier  
17:12 - 17:30 › Fiber hinge modeling for non-linear seismic analysis - Naim Ayoub, Cnam Paris  
16:00 - 17:00 MS6 : Computational and Analytical Methods in Geomechanics (Room # 321-04-01) - Frederic Pellet, Antonin Fabbri, Jean-Michel Pereira, Henry Wong  
16:00 - 16:20 › On the Suitability of Elastic Foundation Models - Aditi Kumawat, Doctoral Student  
16:20 - 16:40 › Multi-scale description of elasto-plasticity in partially saturated swelling clays - Mahdad Eghbalian, Department of Civil Engineering, University of Calgary  
16:40 - 17:00 › Investigation of load transfer mechanisms in reinforced cohesive soil embankments using DEM - Maria Delli Carpini, Institut Polytechnique de Grenoble  
16:00 - 17:30 MS29 : COMPOSELECTOR H2020 Projet mini-symposium (Room # 321-04-03) - BELOUETTAR Salim, KAVKA Carlos , PATZAK Borek , KOELMAN Hein  
16:00 - 16:15 › MuPIF: Multi-Physics distributed Simulation Platform - Borek Patzak, Czech Technical University in Prague, Faculty of Civil Engineering - Stanislav Šulc, Czech Technical University in Prague, Faculty of Civil Engineering  
16:15 - 16:30 › Business decisions in the COMPOSELECTOR project - Carlos Kavka, Esteco SpA  
16:30 - 16:45 › business and economic aspects in conceptual design decision making - hein koelman, Koelman Consulting  
16:45 - 17:00 › Use of short fibers as reinforcing fillers for rubber based composites - Patrycja Polinska, Goodyear S.A.  
17:00 - 17:15 › Decision making under uncertainties - Dinsh Kumar, Luxembourg Institute of Science and Technology  
17:15 - 17:30 › Fibrous composite reinforcements as second gradient materials - Marco-Valerio d'Agostino, GEOMAS  
16:50 - 17:30 MS7 : Resilient Behavior Modelling of Granular Based Materials (Room # 321-04-06) - Christophe Dano, Cyrille Chazallon, PierreYves Hicher  
17:10 - 17:30 › Acoustic emission on the Hole Erosion Test - Charline Jeanniot, Irstea, Aix Marseille Univ, RECOVER  
19:00 - 21:00 Dinner - On Campus  

Thursday, July 4, 2019

Time Event  
08:30 - 09:30 Constituency building and standardisation in the NMBP programme: physics-based modelling and data sharing (Amphithéâtre FREYSSINET) - Dr Anne de BAAS
 
09:30 - 10:30 Additive Manufacturing: modeling and computational challenges!! (Amphithéâtre FREYSSINET) - Prof. Fernandino AURICCHIO
 
10:30 - 11:00 Coffee break  
11:00 - 12:20 MS1: From capillary bonds to immersed granular flow (Room # 321-04-03) - Jean-Yves Delenne, Farhang Radjai, Anthony Wachs  
11:00 - 11:20 › Plastic irreversible compression of wet granular materials assembled in loose states - Jean-Noël ROUX, Laboratoire Navier  
11:20 - 11:40 › Lattice Boltzmann simulations of the wetting of granular materials - Vincent Richefeu, Laboratoire sols, solides, structures - risques  
11:40 - 12:00 › Pendular capillary bridges between unequal-sized spherical particles: Rupture distances and capillary forces - Chao-Fa ZHAO, LaSIE-UMR CNRS, Department of Mechanical Engineering, University of Twente  
12:00 - 12:20 › COUPLED DEM-LBM METHOD FOR SUBMERGED COHESIVE GRANULAR FLOW THROUGH AN ORIFICE - Li-Hua LUU, IRSTEA, Aix Marseille Univ, RECOVER, G2DR  
11:00 - 12:30 MS5 : Recent Advances in the Behavior of Granular Materials (Room # 321-04-06) - Christophe Dano, Cyrille Chazallon, PierreYves Hicher  
11:00 - 11:18 › Geotechnical instrumentation of piles anchored in molasse. - Rosy Milane, Institut National des Sciences Appliquées de Lyon  
11:18 - 11:36 › Physical modelling of Monopile Foundation under Combined Cyclic Loading - Ritesh GUPTA, Laboratoire sols, solides, structures - risques [Grenoble]  
11:36 - 11:54 › A coupled hydro-mechanical modeling of internal erosion around shield tunnel - Zhenyu YIN, The Hong Kong Polytechnic University  
11:54 - 12:12 › VALORISATION Du SCHISTE ET DU LAITIER CRISTALLISE DANS LES CORPS DE CHAUSSEES - Omar Boudlal, Laboratoire de recherche en géomatériaux, Environnement et Aménagement. Département de génie civil, Université Mouloud Mammeri de Tizi-Ouzou  
12:12 - 12:30 › Discrete element modeling of non-cohesive granular soil and chip-like Tire-Derived aggregates mixture - Junqi ZHANG, Central South University  
11:00 - 12:20 MS11 : Innovative Materials for Sustainable Construction (Room # 321-04-02) - Elodie Prud'homme, Geneviève Foray, Martin Cyr, Hubert Rahier, Aveline Darquennes  
11:00 - 11:20 › Physical and mechanical properties of Portland cement blended with dehydrated cement - Eduarda Baptista, Vrije Universiteit Brussel, Université Libre de Bruxelles  
11:20 - 11:40 › Contribution to the development of hydraulic eco-cement using pozzolans locally available in Burkina Faso - Christian RAMADJI, Laboratoire Eco-Matériaux et Habitats Durables (LEMHaD), Institut International d'Ingénierie de l'Eau et de l'Environnement (2iE)  
11:40 - 12:00 › Evaluation of the potential of bark and pith fractions of corn and sunflower stalks as bioaggregates for lightweight vegetal concrete design - Gerardo Altamirano de la Cruz, Universidad Autónoma de Nuevo León Facultad de Ingeniería Civil-Instituto de Ingeniería Civil, Laboratoire Matériaux et Durabilité des constructions [Toulouse]  
11:00 - 12:20 MS22 : Robustness of Infrastructures (Room # 321-04-01) - Simos Gerasimidis, George Deodatis  
11:00 - 11:20 › Experimental Quantification of the Robustness of Suspension Bridge Cables using Neutron Diffraction - Adrian Brügger, Civil Engineering and Engineering Mechanics, Columbia University  
11:20 - 11:40 › Deep Learning for Fast Seismic Reliability Analysis of Bridge Networks - Hadi Meidani, University of Illinois at Urbana-Champaign  
11:40 - 12:00 › Impact of early age damage on the seismic vulnerability of reinforced concrete structures - Chaimaa Jaafari, Univ. Lyon, INSA-Lyon, GEOMAS, F-69621, Villeurbanne.  
12:00 - 12:20 › Model for Structural Robustness - Shalva Marjanishvili, Hinman Consulting Engineers, Inc.  
11:00 - 12:30 MS24 : Vibration Control of Structures Under Multiple Hazards (Room # 321-04-05) - Said Elias Rahimi, Aly-Masoud Aly, Vasant Matsagar, Rajesh Rupakhety  
11:00 - 11:30 › ISOLATED FLOORS FOR NEAR DAMAGE-FREE PERFORMANCE OF BUILDINGS UNDER MULTIPLE HAZARDS - Hussam Mahmoud, Colorado State University  
11:30 - 11:50 › Behavior of a Moveable Barrier with a Triangular Shape for Securing Safe Port City Under Wave Overtopping - DeokHee Won, Korea Institute of Ocean Science and Technology  
11:50 - 12:10 › Influence of Adhesive Tape on Damping Behavior of Cantilever CFRP Composite Tubes - Komal Chawla, PhD Candidate, IIT Kanpur - Samit Ray-Chaudhuri, Professor, IIT Kanpur  
12:10 - 12:30 › EFFECTS OF TUNED LIQUID COLUMN DAMPER PROPERTIES ON THE DYNAMIC RESPONSE OF STRUCTURES - Baki OZTURK, Hacettepe University  
11:00 - 12:20 MS26 : Linear and Nonlinear Vibrations of Complex Structures (Room # 321-04-08) - Daya +Boudaoud  
11:00 - 11:20 › Impact between reinforced concrete structures subjected to seismic loading  
11:20 - 11:40 › New Rotor Topology Featuring Passive Vibration Compensation Mechanism - Gauthier Fieux, University of Bath  
11:40 - 12:00 › Natural Frequency Identifications of Spindle-Tool System of Machine Tools during Machining - Chih-Chun Cheng, Advanced Institute of Manufacturing with High-tech Innovations, Department of Mechanical Engineering, National Chung Cheng University, Taiwan  
12:00 - 12:20 › Analytical model for the dynamics of a railway sleeper on a non-homogeneous foundation - Le Hung TRAN, Laboratoire Navier  
12:30 - 14:00 Lunch  
14:00 - 15:30 MS4 : Mini-Symposium in Honour of Professor Pierre-Yves HICHER (Amphithéâtre FREYSSINET) - Ali Daouadji, Zhenyu Yin  
14:00 - 15:30 MS9 : Enriched Continuum Mechanics and Bridging Different Scales (Room # 321-04-08) - Angela Madeo, Patrizio Neff  
14:00 - 14:30 › A priori identification of material parameters in the relaxed micromorphic model - Patrizio Neff, University of Duisburg-Essen  
14:30 - 14:50 › Well-posedness of nonstandard relaxed models including novel micro-inertia terms - Ionel-Dumitrel Ghiba, Alexandru Ioan Cuza University, Department of Mathematics  
14:50 - 15:10 › Transparent relaxed micromorphic description of anisotropy in metamaterials - Marco Valerio D'AGOSTINO, LaMCoS  
15:10 - 15:30 › Indentation in Planar Layered Elastic Media - Deepak Sachan, Department of Mechanical Engineering  
14:00 - 15:30 MS11 : Innovative Materials for Sustainable Construction (Room # 321-04-02) - Elodie Prud'homme, Geneviève Foray, Martin Cyr, Hubert Rahier, Aveline Darquennes  
14:00 - 14:30 › Surface mechanisms occurring during ageing (T, RH) of nanostructured silica, use of TGA/DSC, TGA/µGC-MS and FTIR as complementary tools to deepen the understanding - Bruno CHAL, MATEIS  
14:30 - 14:50 › Effects of hydroxyl on the mechanical properties of silica nano-structures through atomistic simulations  
14:50 - 15:10 › Mechanical and X-ray tomography characterization of silica aerogel composites - Guillaume Hamelin, SIMaP – CNRS – Univ. Grenoble Alpes  
14:00 - 15:30 MS18 : Machine Learning and Informatics for Materials Discovery and Design (Room # 321-04-06) - Mathieu Bauchy, N M Anoop Krishnan  
14:00 - 14:18 › Rapid Damage Evaluation of Bridge Portfolios using Machine Learning Techniques - Sujith Mangalathu, University of California Los Angeles  
14:18 - 14:36 › Predicting Concrete Strength by Machine Learning  
14:36 - 14:54 › Prediction of properties of glasses using Gaussian Process Regression - Kodamana Hariprasad, Indian Institute of Technology, Delhi - Anoop Krishnan N M, Indian Instute of Technolgy Delhi  
14:54 - 15:12 › Predicting the Mechanical Properties of Glasses by Machine Learning - Mathieu Bauchy, University of California at Los Angeles [Los Angeles]  
15:12 - 15:30 › Machine learning models to predict the elastic properties of oxide glasses - N M Anoop Krishnan, Indian Institute of Technology Delhi  
14:00 - 15:30 MS22 : Robustness of Infrastructures (Room # 321-04-01) - Simos Gerasimidis, George Deodatis  
14:00 - 14:20 › Stochastic Prediction of the Corrosion Propagation Rate in Reinforced Concrete Structures Using Experimental Data - george saad, American University of Beirut  
14:20 - 14:40 › Development of analytical framework for objective resilience of corroded steel bridges - Simos Gerasimidis, University of Massachusetts, Amherst  
14:40 - 15:00 › Formal Concept Analysis for Predictive Modeling and Sustainable Infrastructures - Tanmay Vora, VJTI, University of Mumbai  
14:00 - 15:30 MS24 : Vibration Control of Structures Under Multiple Hazards (Room # 321-04-05) - Said Elias Rahimi, Aly-Masoud Aly, Vasant Matsagar, Rajesh Rupakhety  
14:00 - 14:20 › Reliability of a Base-Isolated Building under Earthquake, Wind Excitation and Blast-Induced Ground Motion - Vasant Matsagar, Dogra Chair Professor  
14:20 - 14:40 › An effective controller-observer technique in digital domain for vibration control of structures - Jagajyoti Panda, PhD Candidate, IIT Kanpur - Samit Ray-Chaudhuri, Professor, IIT Kanpur  
14:40 - 15:00 › Application of Viscous Fluid Dampers to Rehabilitate Structural Vibrations - Baki OZTURK, Hacettepe University  
15:00 - 15:20 › Simulation of liquid sloshing in U-shaped containers as dampers in high-rise buildings  
15:30 - 16:00 Coffee break  
16:00 - 17:30 MS4 : Mini-Symposium in Honour of Professor Pierre-Yves HICHER (Amphithéâtre FREYSSINET) - Ali Daouadji, Zhenyu Yin  
16:00 - 17:30 MS9 : Enriched Continuum Mechanics and Bridging Different Scales (Room # 321-04-08) - Angela Madeo, Patrizio Neff  
16:00 - 16:30 › A phase field approach to fingering and fracturing in partially saturated porous media - Giulio Sciarra, Institut de Recherche en Génie Civil et Mécanique (UMR CNRS 6183)  
16:30 - 16:50 › A Phase field approach of damage evolution in partially saturated porous media - Siddhartha Ommi, Institut de Recherche en Génie Civil et Mécanique - Ecole Centrale de Nantes - Giulio Sciarra, Institut de Recherche en Génie Civil et Mécanique - Ecole Centrale de Nantes - Panagiotis Kotronis, Institut de Recherche en Génie Civil et Mécanique - Ecole Centrale de Nantes  
16:50 - 17:10 › Phase Field Topology Optimization with Cosserat Continuum Theory - Ingo Muench, Karlsruhe Institute of Technology  
17:10 - 17:30 › Remodelling and fibre re-orientation in fibre-reinforced living tissues - Salvatore Di Stefano, Dipartimento di Scienze Mathematiche "G.L. Lagrange"  
16:00 - 17:30 MS11 : Innovative Materials for Sustainable Construction (Room # 321-04-02) - Elodie Prud'homme, Geneviève Foray, Martin Cyr, Hubert Rahier, Aveline Darquennes  
16:00 - 16:30 › Repairing capacity of alkali-activated cementitious materials - Aveline Darquennes, Laboratoire de Génie Civil et Génie Mécanique - Institut National des Sciences Appliquées de Rennes  
16:30 - 16:50 › Hybrid cements made of engineered CaO-Al2O3-FeOx-SiO2 slags - Jorn Van De Sande, Vrije Universiteit Brussel, Department of Materials and Chemistry, KU Leuven, Department of Materials Engineering, SIM vzw  
16:50 - 17:10 › Study of the interaction between clays and alkali-activated slag's hydrates in stabilized poured earth concrete - Ugo DE FILIPPIS, Institut National des Sciences Appliquées de Lyon  
17:10 - 17:30 › Synthesis of geopolymer binders using clays and sands from Fez region in Morocco and study of mechanical strength - Anass El khomsi, LCA Université sidi Mohammed Ben Abdellah FST Fès, LCMC Université Sidi Mohammed Ben Abdellah FST Fès, IRCER University of Limoges  
16:00 - 17:30 MS22 : Robustness of Infrastructures (Room # 321-04-01) - Simos Gerasimidis, George Deodatis  
16:00 - 16:30 › Research on corrosion for the inside of concrete sewer pipelines - Xiangling Gao, Tongji University  
16:30 - 17:00 › Effects of Geometrical Properties and Galvanizing Practices on High-Mast Illumination Pole Demands During Galvanizing Process - Reza Nasouri, University of Texas at San Antonio  
16:00 - 17:30 MS24 : Vibration Control of Structures Under Multiple Hazards (Room # 321-04-05) - Said Elias Rahimi, Aly-Masoud Aly, Vasant Matsagar, Rajesh Rupakhety  
16:00 - 16:20 › The Performance of the Passive Tuned Mass Dampers for Response Control of Tall Buildings while Subjected Multi-Hazard Loads - Said Elias Rahimi, Post-Doctral  
16:20 - 16:40 › Optimization and application of Prominent Tuned Mass Damper - Yonggang Tan, Dalian University of Technology, Dalian, China  
16:40 - 17:00 › Extreme Storm Surge Return Period Prediction Using Tidal Gauge Data and Estimation of Damage to Structures from Storm-Induced Wind Speed in South Korea - Sang Guk Yum, Columbia University  
16:00 - 17:30 MS30 : High Performance Structural Polymer-based Composites and Their Related Applications (Room # 321-04-06) - DAVID RUCH, Henri PERRIN, BELOUETTAR Salim  
16:00 - 16:18 › Use of short fibers as reinforcing fillers for rubber based composites - Benoit Duez, Goodyear S.A.  
16:18 - 16:36 › Specific adhesion test definition for 3D printed composite structures - Hakim Boudaoud, Equipe de Recherche sur les Processus Innovatifs  
16:36 - 16:54 › Metallic coating properties analysis depending on composite manufacturing conditions - Henri PERRIN, Luxembourg Institute of Science and Technology  
16:54 - 17:12 › Thermal conductivity of composites with general imperfect interfaces - DAVID RUCH, Luxembourg Institute of Science and Technology  
17:12 - 17:30 › Functional interfaces and interphases in fiber reinforced polymer composites - DAVID RUCH, Luxembourg Institute of Science and Technology  
16:00 - 17:00 MS19 : Stability and failure of structures and materials (Room # 321-04-03) - Noël Challamel, Wadee Ahmer  
16:00 - 16:20 › REINFORCEMENT THE SEISMIC INTERACTION OF SOIL DAMAGED PILES-BRIDGE BY USING MICROPILES - Mohanad Alfach, Mohanad Talal Alfach  
16:20 - 16:40 › The influence of lateral impact damages on buckling, postbuckling and failure of channel section beam - Tomasz Kubiak, Łódź University of Technology  
16:40 - 17:00 › Fatigue Lifetime Prediction of Steel Bridges based on Fatigue Analysis and Reliability - Ali Reza Rahai, Prof., Civil Engineering Department, Amirkabir Univ. of Technology, Tehran  
16:20 - 17:20 MS23 : Shell Buckling (Room # 321-04-01) - Simos Gerasimidis, Pedro Reis  
16:20 - 16:40 › On Establishing Buckling Knockdowns for Imperfection-Sensitive Shell Structures - Simos Gerasimidis, University of Massachusetts, Amherst  
16:40 - 17:00 › A nomogram for 2nd order tensor principal values and invariants space - mehmet sahin, Turkish Aerospace Industries  
17:00 - 17:20 › Imperfection-insensitive thin wavy cylindrical shells under bending: Effect of local radius of curvature on buckling and imperfection-sensitivity - Simos Gerasimidis, University of Massachusetts, Amherst  
18:00 - 19:00 Cocktail - Salle de la Corbeille – Palais de la Bourse (Lyon)  
19:00 - 22:00 Banquet - Salle de la Corbeille – Palais de la Bourse (Lyon)  

Friday, July 5, 2019

Time Event  
09:00 - 10:00 Fabrication of High Performance Parts by Liquid Composite Molding and Application to Polymer Based Composites (Amphithéâtre FREYSSINET) - Prof. François TROCHU
 
10:00 - 10:30 Coffee break  
10:30 - 10:50 MS2 : Suffusion Process and Mechanical Behavior (Room # 321-04-03) - Jean-Yves Delenne, Farhang Radjai, Anthony Wachs  
10:30 - 10:48 › Modelling the elasto-plastic behaviour of suffusive soils - Quentin Rousseau, Institut de Recherche en Génie Civil et Mécanique (UMR CNRS 6183)  
10:30 - 11:50 MS3 : Induced Seismicity (Room # 321-04-02) - Nathalie Casas, Guilhem Mollon  
10:30 - 10:50 › SLIP IN GRANULAR FAULT GOUGES - Nathalie CASAS, Géomécanique, Matériaux et Structures, Laboratoire de Mécanique des Contacts et des Structures [Villeurbanne]  
10:50 - 11:10 › Study of induced seismicity in Morocco - ibrahim ouchen, Earth Sciences Depth., Scientific Institute, Mohammed V- University  
11:10 - 11:30 › The exploring of the induced seismicity caused by the explosions in the north of morocco. - oussama arab, Earth science depth, Scientific Institute, Mohammed V University  
11:30 - 11:50 › Management of Industrial Risk in Urban Area, Case Study of the City of Bejaia (Algeria) - BOUBAKEUR YKHLEF, Laboratory Materials and Durability of Constructions  
10:30 - 12:00 MS9 : Enriched Continuum Mechanics and Bridging Different Scales (Room # 321-04-08) - Angela Madeo, Patrizio Neff  
10:30 - 11:00 › A new two-dimensionnal metastructure with acoustic frequency band gaps - M. Collet (Keynote Lecture)  
11:00 - 11:20 › Towards the engineering design of metamaterials' structures through micromorphic enriched continuum modeling - Angela Madeo, GEOMAS, INSA Lyon  
11:20 - 11:40 › Dynamic response of metastructures as relaxed micromorphic continua - Domenico Tallarico, Swiss Federal Laboratories for Materials Science and Technology [Dübendorf]  
11:40 - 12:00 › Microstructure-related Stoneley waves and wavefront manipulation at a 2D Cauchy/relaxed micromorphic interface - Alexios Aivaliotis, GEOMAS  
10:30 - 11:10 MS28 : Dynamic behaviour of geomaterials (Room # 321-04-01) - Ahmed Brara  
10:30 - 10:50 › High strain rate behaviour of ice-silicate mixtures - Shruti Pandey, Department of Mechanical Engineering  
10:50 - 11:10 › Determination of dynamic properties of Hostun sand using bender elements under different hygrometric conditions - Ali Brara, Laboratoire de Génie de la Construction et Architecture, Université de Bejaia  
10:30 - 10:50 MS5 : Recent Advances in the Behavior of Granular Materials (Room # 321-04-06) - Christophe Dano, Cyrille Chazallon, Pierre-Yves Hicher  
10:30 - 10:50 › Large-scale test on geosynthetic reinforced unpaved roads on soft subgrade. - Nicole Khoueiry, Université de Lyon,INSA Lyon  
10:45 - 12:00 MS1: From capillary bonds to immersed granular flow (Room # 321-04-03) - Jean-Yves Delenne, Farhang Radjai, Anthony Wachs  
10:48 - 11:06 › DEM-LBM METHOD FOR THE STUDY OF LOCAL EROSION LAW FOR COHESIVE GRANULAR SOILS - Pierre Philippe, IRSTEA, Aix Marseille Univ  
11:06 - 11:24 › Coupling LBM and DEM to simulate the motion of wet granular assemblies - Lhassan AMARSID, Laboratoire Navier  
11:24 - 11:42 › Micromechanical Description of Stresses in Fine-grained Wet Media: Adsorption and Capillary Forces - Mojtaba Farahnak Langroudi, Department of Civil Engineering, University of Calgary  
11:42 - 12:00 › Shear flow of wet granular materials in the pendular regime: from the quasistatic to inertial and viscous regimes. Experiments and DEM simulations. - Jean-Noël ROUX, Laboratoire Navier  
10:50 - 11:50 MS7 : Resilient Behavior Modelling of Granular Based Materials (Room # 321-04-06) - Christophe Dano, Cyrille Chazallon, PierreYves Hicher  
10:50 - 11:10 › Cold recycling of asphalt aggregates without binder addition - Cyrille Chazallon, ICUBE-GCE  
11:10 - 11:30 › A Micromechanical Model for Biopolymer-bound Soil Composites - Isamar Rosa, Department of Civil and Environmental Engineering, Stanford University  
11:30 - 11:50 › Modeling of 2PB complex modulus test of HMA based on Non-Smooth Contact Dynamics method - Juan-Carlos QUEZADA, ICUBE-GCE - Cyrille Chazallon, ICUBE-GCE  
11:10 - 12:00 MS12 : High Temperature Effects on the Dynamic Strength of Concrete (Room # 321-04-01) - LEVON AVETISYAN, Ashot Tamrazyan  
11:10 - 11:50 › High temperature effects on the dynamic strength of concrete - LEVON AVETISYAN, National Research University Moscow State University of Civil Engineering  
11:50 - 12:00 › Concrete under Fire and Blast - Combined Modeling at Two Time Scales - Christoph Roller, Fraunhofer Institute for High-Speed Dynamics, Ernst-Mach-Institut, EMI  
12:00 - 12:30 Closing of the conference - .  
12:30 - 14:00 Lunch  
Online user: 10 RSS Feed